General Building
- Conforms to AS3972
- True bright white
White
Cement
Dingo White Cement can be used in a wide range of mortar, concrete and grout applications.
It is suitable for bricklaying, rendering, paving and general building.
Directions using a cement mixer
 |
 |
 |
| Add Clean water | Add materials and allow to mix for a least 7 minutes | Apply materials |
- For Mortar, Render & Paving mortar, Combined Cement, hydrated Lime and sand.
- For Concrete, Combined Cement, Sand and Aggregate
Gradually add water and mix thoroughly to a workable consistency. Excess water ruins good concrete and mortar. It is recommended to use a bucket rather than a shovel to measure out your materials.
Refer to the chart as a guide for the various applications.
| APPLICATION | CEMENT | SAND | HYDRATED LIME | STONE | 20KG BAGS OF CEMENT PER CUBIC METRE | LITRES OF WATER PER BAG OF CEMENT |
| CONCRETE | 1 | 2 | – | 3 | 20 | 9-11 |
| PAVING | 1 | 2.5 | – | 3.5 | 16 | 11-13 |
| RENDER | 1 | 4 | – | – | 24 | 17-20 |
| MORTAR (ENHANCED WORKABILITY) |
1 | 6 | 1 | – | 12 | 20-23 |
Safety
Safety
- Avoid contact with eyes and skin from wet and dry cement
- Do not breathe in dust. Wear a P1 or P2 dust mask suitable for particulates when exposed to dust
- Wear suitable protective clothing, including gloves or barrier cream and eye protection
- Wash skin thoroughly after handling. Wash work clothes regularly.
- Irrigate eyes with plenty of water for 15 minutes and seek medical attention if pain patsies.
- For more Safety & Storage information refer to SDS sheet