Concrete & Mortar Premix
Download SDS- Used around the Home and Building site
- Just add clean water
- Bedding of shower bases and toilets pans
- Used anywhere where sand & cement is required
- Available in water resistant plastic packaging.
Sand and Cement
Dingo Sand & Cement a mix of washed sand and general purpose cement. Suitable for repairs around the home and building site, patching around electric & plumbing fittings, re-pointing on block, brick and render walls, bedding of shower bases and toilets pans. Just add water.
Available in water resistant plastic packaging.
Directions for use.
- Empty bag into a Wheelbarrow or on to a non-porous surface
- Add water slowly and mix until a workable consistency is achieved.
- Apply your mixed product with a trowel
- Approximately 2.8 litres of water to a 20kg Dingo Sand & Cement mix.
- Small amounts can be mixed in bucket just add water and your dry mix sand cement.
- The water should be drinkable
- Before patching wall make sure the surface is free of dust and lightly mist spray with water.
Safety
Safety
- Wear suitable protective clothing, including gloves and eye protection
- Avoid contact with eyes and skin from wet and dry cement
- Do not breathe in dust. Wear a P1 or P2 dust mask suitable for particulates when exposed to dust
- Wash skin thoroughly after handling. Wash work clothes regularly.
- Irrigate eyes with plenty of water for 15 minutes seek medical advice if discomfort or other symptoms persist
- For more Safety & Storage information refer to SDS sheets.