Dingo Cement

Concrete & Mortar Premix

  • Used around the Home and Building site
  • Just add clean water.
  • Bedding of shower bases and toilets pans
  • Used anywhere where sand & cement is required 
  • Available in water resistant plastic packaging.

Sand and Cement

Dingo Sand & Cement a mix of washed sand and general purpose cement. Suitable for repairs around the home and building site, patching around electric & plumbing fittings, re-pointing on block, brick and render walls, bedding of shower bases and toilets pans. Just add water.

Available in water resistant plastic packaging.

Directions for use.

  1. Empty bag into a Wheelbarrow or on to a non-porous surface
  2. Add water slowly and mix until a workable consistency is achieved.
  3. Apply your mixed product with a trowel


  • Approximately 2.8 litres of water to a 20kg Dingo Sand & Cement mix.
  • Small amounts can be mixed in bucket just add water and your dry mix sand cement.
  • The water should be drinkable
  • Before patching wall make sure the surface is free of dust and lightly mist spray with water.




  • Wear suitable protective clothing, including gloves and eye protection
  • Avoid contact with eyes and skin from wet and dry cement
  • Do not breathe in dust. Wear a P1 or P2 dust mask suitable for particulates when exposed to dust
  • Wash skin thoroughly after handling. Wash work clothes regularly.
  • Irrigate eyes with plenty of water for 15 minutes seek medical advice if discomfort or other symptoms persist
  • For more Safety & Storage information refer to SDS sheets.