Dingo Cement

Concrete & Mortar Premix

  • Conforms to AS 3700 for M3 Mortar
  • Suitable for bricklaying and roof tile pointing
  • Simple to use pre-mixed Mortar


Bastion Mortar is used for a host of Building and DIY projects including brickwork, block work, garden edging, roof tile pointing and bonding pavers. It is a Drymix product combination of sand, cement and lime. Just add water.

Available in water resistant plastic packaging.

cm1 cm2 gpc3-150x150
Empty bag into a Wheelbarrow or on to a non-porous surface Add 4 litres of water slowly and mix to a workable consistency is achieved. Apply your mixed product with a trowel
  • Approximately 4 litres of water to a 20kg Mortar mix
  • Always use clean water. Too much water will make the mortar weaker
  • If you want to colour your Mortar, you should add colour oxide in the prescribed manner
  • Before patching wall make the sure surface is free of dust and lightly mist spray with water
  • Mortar Mix contains lime – do not use near fish ponds



  • Wear suitable protective clothing, including gloves and eye protection
  • Avoid contact with eyes and skin from wet and dry cement
  • Do not breathe in dust. Wear a P1 or P2 dust mask suitable for particulates when exposed to dust
  • Wash skin thoroughly after handling. Wash work clothes regularly.
  • Irrigate eyes with plenty of water for 15 minutes seek medical advice if discomfort or other symptoms persist
  • For more Safety information refer to SDS sheets