Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/customer/www/dingocement.com.au/public_html/wp-content/plugins/gravityforms/common.php on line 1261
Fast Set Hi-Strength Concrete | Dingo Cement
Dingo Cement
  • Conforms to AS 3648
  • Suitable for garden slabs and paths, foundations and deck/pergola footings
  • Simple to use pre-mixed concrete
  • Approximately 110 x 20kg bags per cubic metre of concrete

Fast Set Hi-Strength Concrete

Fast Set High Strength Concrete is ideal for larger posts, fence corners posts and gate posts.

It is a Dry mix Concrete which is a combination of aggregate, sand and cement mixed together this product offers consumers a fast setting premixed product utilizing high alumina cement giving much stronger harder finish. Just Add water.

Available in water resistant plastic packaging.

cm1 cm2 cm3
Empty bag into a Wheelbarrow or on to a non-porous surface Add water slowly and mix until a stiff, but workable consistency is achieved. Compact the concrete well after placement, Screed level with a board, trowel smooth if required
  • Approximately 2.3 litres of water to a 20kg Concrete mix
  • Always use clean water. Too much water will make the concrete weak
  • If you want to colour your concrete, you should add colour oxide in the prescribed manner


  • Eight 20kg bags of Concrete Mix will make approximately 1.5 square metres of concrete to a depth of 50mm
  • Example 5 square metres: 5 metres long by 1 metre wide and depth at 50mm will need approximately 26 bags of 20kg Concrete



  • Wear suitable protective clothing, including gloves and eye protection
  • Avoid contact with eyes and skin from wet and dry cement
  • Do not breathe in dust. Wear a P1 or P2 dust mask suitable for particulates when exposed to dust
  • Wash skin thoroughly after handling. Wash work clothes regularly
  • Irrigate eyes with plenty of water for 15 minutes seek medical advice if discomfort or other symptoms persist
  • For more Safety information refer to SDS sheets